In this size of Datejust, there are a lot of style options, while the most popular are stainless steel, full gold and two tone gold. Today, I will show you three two tone Rolex Datejust replica watches, the watches are in two tone yellow gold style, while their dial has silver white, black and yellow gold. These three watches are the newest replicas from ARF, which is a famous factory now because of their highest quality Rolex replicas.ARF Two Tone Rolex Datejust Replica Rolex 36mm Datejust Yellow Gold DialI will give a review of the model with yellow gold dial. And in the end of this article, I will show you photos of other two models. Like other Rolex made by ARF, this 36mm Datejust is fully made of 904L stainless steel, the case is very thin, only 12mm. Not like other cheap replicas with a heavy and thick case because they are using a cheaper automatic movement. The gold part of the case is plated with thick yellow gold, which is measured to be in 5 mils. So is the yellow gold fluted bezel. The case is brushed in front face, while its sides are smoothly polished, including the lugs that have been perfectly blent with the case body.Replica Rolex 36mm Datejust Jubilee Like the case and bracelet, the dial is also in yellow gold, all hour markers are three-dimensional long squares, which feature yellow gold edge and are filled with white luminescence. Hour hand and minute hand are also applied white lume material in the center. Because of high quality Swiss luminous material usage, the dial will have a very strong green light in the dark. On the outer dial, there is black minute scales in track style, black Rome markers in every five minutes.ARF Rolex Datejust Crown Rolex Datejust 904L Stainless Steel Case The two tone Jubilee bracelet also represents the highest quality workmanship of ARF watch-making technology. The Jubilee bracelet is very special, it has three secitions of yellow gold links in the middle, which is exactly in line with the yellow gold fluted bezel. The middle links in yellow gold are polished, while the links at both sides are brushed, the corner of each link at sides is polished so smooth and round, you will not feel uncomfortable when wearing the watch on hand. In our market, it is very expensive to buy one separate golden bracelet, sometimes you need to spend more than 150 US Dollars.
It is more like a dress watch, not a sports or diving watch. The watch is fitted with a stainless steel bracelet, but VS factory also offers rubber or nylon band for it. The dial has different color options like black, blue, grey, white, ect., but I like this dark blue. The replica Omega Aqua Terra watch has a case diameter of 41mm, its case is brushed, the middle links of the bracelet is polished, which is highly contrasting with the other polished metal part of the watch. VS factory makes the vertical patterns on the dial correct, 100% the same as genuine. All hour markers and hands are fully applied with Swiss lume. By the way, the replica is equipped with VSF custom-made Super Clone 8900 movement, it is not based on any Chinese automatic movement, this Super Clone 8900 is VS factory’s in-house calibre.It is very controversial that this Omega De Ville is in this top five list. There are a lot of sports Omega watches that are sold better than this De Ville Hour Vision. Yes, I admit that there are a lot of other best-selling Seamaster watches that are more popular than this De Ville. But in this list, I want to add one new face, we saw too many sports or diver’s watches in normal times. And this Omega De Ville Hour Vision is also the latest addition in our market. The case is made of polished stainless steel and 41mm in diameter. The dial looks large, this is one of the common features for all dress watches, the case part is restricted in structure, so the dial can look larger. Blue dial is elegant and has an elegant outlook. The movement is VSF custom-made super clone 8500, which has been researched and developed by VSF for several years.
GS is a factory that only made some ladies watches in the past, the Longines PrimaLuna replica they made has a good quality. About this IWC Mark XVIII IW327006 replica, two factories are making it, GS and V7. In machine, V7 installs a genuine ETA 2892, but the price is expensive. GS factory uses an Asian clone ETA 2892 movement inside the replica, it is based on our Sea-Gull 2892, so the replica has a cheaper price, more cost-effective than V7’s. Before we go a deep review of replica IWC Mark XVIII Titanium Watch, let’s check its specification first.The case is made of high grade Titanium, compared with 316L stainless steel, Titanium has a better performance of scratch and corrosion resistance, Titanium case reduces the whole weight of the replica watch, it is more comfortable for daily wear. Put this replica besides a genuine watch, you can not tell which one is replica. 40mm case has the same size as genuine, sapphire crystal face has a good reflective effect, high quality calf skin leather band and hand stitching have no difference.
The green-tinted sapphire crystal fitted to the reference 116400GV Milgauss has quickly become one of the defining characteristics of Rolex’s anti-magnetic line of watches. The Rolex Milgauss was first introduced in 1956; however, it was not until 2007 that it received its now-signature, green sapphire crystal – an exclusive feature that was originally introduced as a way for Rolex to celebrate the 50th anniversary of their Milgauss line.No other watch in Rolex’s current catalog is fitted with a green-tinted (or any other color) sapphire crystal. However, at the present time, all Milgauss watches that are currently in production leave the factory with green sapphire crystals. Rather than simply being a layer or coating, the light green tint is present throughout the entire material of the crystal, and will not fade or discolor after prolonged wear and use.Rolex claims that it took them many years of research and development to master and perfect the secret procedure of manufacturing their green-tinted sapphire crystals and that the actual process of producing the crystals takes multiple weeks. What is most interesting is that despite a usual eagerness to patent their various in-house technologies, Rolex claims that the green sapphire crystal in the Milgauss is “not patented, as it is so difficult to make that no one else would even venture to try.”Rolex will never reveal their exact formulas and secrets about how they manufacture the green-tinted sapphire crystals fitted to the Milgauss; however, we do know some general information about green-colored synthetic sapphire and the production of sapphire watch crystals as a whole.There are a number of different ways to produce synthetic sapphire, all of which fall into the following general methods of production: melt growth, solution growth, and high-temperature/high-pressure growth. It is hypothesized that Rolex uses a hydrothermal method of production for its synthetic sapphire crystals, which is slow, expensive, and uses heat and pressure to imitate the conditions present deep inside the earth that is responsible for the production of naturally-occurring crystalline gemstones.
And of course, the movements of both watches are COSC certified chronometers.But the bracelets are where we begin to see differences between the Sub and the GMT. The Submariner gets Rolex’s folding Oysterlock safety clasp with their Glidelock extension system. The GMT’s Oyster bracelet, on the other hand, buckles with a simpler folding Oysterlock safety clasp with and Easylink 5 mm comfort extension link. There have been multiple cases where the Submariner and the GMT are compared.The biggest difference between the two watches is the GMT’s additional hour hand tipped with a triangular “arrowhead.” This hand indicates the hours in 24-hour format. This fourth hand can be set independently of the main hour hand, and the 24-hour time is marked on the bi-directional rotating bezel.In fact, when moving across time zones, one can move the GMT’s regular hour hand to reset to local time without affecting the 24 hour hand’s position. This makes such adjustments easy and routine for the busy traveler.With the Submariner, choices of bezel and dial colors depending on the metal chosen means you have numerous variations from which to choose. The uni-directional bezel is marked in typical dive watch fashion of five minute increments, numbers each ten minutes, and the first fifteen minutes in one-minute tick marks.Even though the GMT features Rolex’s patented Triplock screw-down crown system, the watch is only rated to 100M/330Ft (in all metals). The Submariner is rated to 300M or 1000Ft. This is interesting, given that both watches are housed in the super case.So there you have it. The Submariner and the GMT-Master II are fraternal twins, nearly identical, but each with its own capabilities.5 of the Best Looking Rolex Cerachrom Bezels Rolex isn’t known for being particularly bold with design. However, what they are known for is being innovative, whether that’s creating their own alloys like Everose or mastering the art of hard-to-achieve colored dials. Most recently, one of their biggest innovations to roll out was their new and improved Cerachrom bezels, like those that can be found on the Rolex Daytona and GMT-Master II.Because the bezel on a watch is so exposed, it is often susceptible to shocks, corrosion, fading and scratching. Therefore, Rolex wanted to upgrade specific Professional models in their Oyster collection from aluminum bezel inserts to something much more durable. In typical Rolex fashion, they’ve created their own durable ceramic called Cerachrom – which is a mix of the words “ceramic” and the Greek word for color, “chrom.”Today, we’re looking at the best of the best of these Cerachrom bezels. The most good looking, handsome, and striking examples since this new material was rolled out.I wanted to note this one first because it just looks so different than the other Cerachrom bezels that Rolex has produced. That matte, sandblasted ceramic bezel has this effortlessly modern feel, and is kind of everything that you’d want to see out of a new material. Plus, that black bezel just totally pops against the Everose case.They said it couldn’t be done. When Rolex first unveiled their Cerachrom bezel in 2005, they did so in one solid color and actually admitted that it was just too hard to do a two-colored bezel with the material. Then in 2013, they presented us with this – a blue and black bezel that became instantly iconic. It was a great addition to the GMT-Master II lineup, but it also further illustrates Rolex’s dedication to innovation. Plus it’s totally sharp, right?This is a jaw-dropping look – that Chestnut brown monobloc Cerachrom against an icy blue dial. It’s unique, it’s beautiful, and it’s all executed so well. The Daytona is already a love-it-or-hate-it watch, so it’s fitting that they’ve chosen to go with such a bold, and frankly fun choice for the bezel here.The blue Cerachrom bezel on the Yacht-Master II is just striking. The way the bold blue contrasts against the white dial and Oyster case is just so elegant.
